http://ibls.org/mediawiki/index.php?action=history&feed=atom&title=File%3AMogulPonyPivonRepair_3176.jpgFile:MogulPonyPivonRepair 3176.jpg - Revision history2026-07-05T17:52:44ZRevision history for this page on the wikiMediaWiki 1.39.2http://ibls.org/mediawiki/index.php?title=File:MogulPonyPivonRepair_3176.jpg&diff=2958&oldid=prevDnevil: The final operation for this part is to debur the threaded hole. I placed a 7/16 inch drill in the tailstock, and gently applied pressure to the unlocked tailstock while turning the three jaw chuck by hand. One or two turns is all that is necessary. ...2013-10-13T04:44:05Z<p>The final operation for this part is to debur the threaded hole. I placed a 7/16 inch drill in the tailstock, and gently applied pressure to the unlocked tailstock while turning the three jaw chuck by hand. One or two turns is all that is necessary. ...</p>
<p><b>New page</b></p><div>The final operation for this part is to debur the threaded hole. I placed a 7/16 inch drill in the tailstock, and gently applied pressure to the unlocked tailstock while turning the three jaw chuck by hand. One or two turns is all that is necessary. Be careful not to cut too deeply. Photo by Daris A. Nevil.</div>Dnevil