SigOS: Installing Software - Revision history

Dnevil: Dnevil moved page SigOS: Installing on Hardware to SigOS: Installing Software: More descriptive of the purpose of the page.

2024-12-05T22:45:34Z

Dnevil moved page SigOS: Installing on Hardware to SigOS: Installing Software: More descriptive of the purpose of the page.

← Older revision	Revision as of 17:45, 5 December 2024
(No difference)

Dnevil: /* From Linux */

2024-12-05T17:10:09Z

From Linux

← Older revision		Revision as of 12:10, 5 December 2024
Line 15:		Line 15:
	* Plug the USB-C end into the ESP32-S2 Mini		* Plug the USB-C end into the ESP32-S2 Mini
	* Run "sudo tail -f /var/log/messages" on your Linux computer		* Run "sudo tail -f /var/log/messages" on your Linux computer
	* Press and hold the "0" button on the ESP32-S2 Mini, then "tap" the "Reset" button		* Press and hold the "0" button on the ESP32-S2 Mini, then "tap" the "Reset" button, then release "0" button
	* You should see the Linux computer recognize the board in the output of /var/log/messages		* You should see the Linux computer recognize the board in the output of /var/log/messages
	** It will look something like this:		** It will look something like this:

Dnevil: /* ESP32 S2 Mini */

2024-12-05T17:09:25Z

ESP32 S2 Mini

← Older revision		Revision as of 12:09, 5 December 2024
Line 3:		Line 3:
	== ESP32 S2 Mini ==		== ESP32 S2 Mini ==

	Installing ~~[https://micropython.org/download/ESP32_GENERIC_S2/~~ MicroPython].		=== Installing MicroPython ===

	=== From Linux ===		* https://micropython.org/download/ESP32_GENERIC_S2/

			==== From Linux ====

	* These instructions are for installation from a Linux computer		* These instructions are for installation from a Linux computer
Line 77:		Line 79:
	</pre>		</pre>

	=== From Windows ===		==== From Windows ====

	Here is a tutorial video on how to install MicroPython to the ESP32-S2 Mini from a Windows computer.		Here is a tutorial video on how to install MicroPython to the ESP32-S2 Mini from a Windows computer.

	<youtube>cuW9fZ0hr18</youtube>		<youtube>cuW9fZ0hr18</youtube>

Dnevil: /* ESP32 S2 Mini */

2024-12-05T17:04:15Z

ESP32 S2 Mini

← Older revision		Revision as of 12:04, 5 December 2024
Line 4:		Line 4:

	Installing [https://micropython.org/download/ESP32_GENERIC_S2/ MicroPython].		Installing [https://micropython.org/download/ESP32_GENERIC_S2/ MicroPython].

			=== From Linux ===

	* These instructions are for installation from a Linux computer		* These instructions are for installation from a Linux computer
Line 74:		Line 76:
	To suppress this note, set --after option to 'no_reset'.		To suppress this note, set --after option to 'no_reset'.
	</pre>		</pre>

			=== From Windows ===

			Here is a tutorial video on how to install MicroPython to the ESP32-S2 Mini from a Windows computer.

			<youtube>cuW9fZ0hr18</youtube>

Dnevil: /* ESP32 S2 Mini */

2024-12-04T00:16:04Z

ESP32 S2 Mini

@@ Line 25: / Line 25: @@
 <pre>
 esptool.py --chip esp32s2 --port /dev/ttyACM0 erase_flash
 </pre>
 * Download the latest released version of [https://micropython.org/download/ESP32_GENERIC_S2/ MicroPython for the ESP32-S2 Mini from here]. You will want the file ending with ".bin"

Dnevil: Created page with "Category:SigOS == ESP32 S2 Mini == Installing [https://micropython.org/download/ESP32_GENERIC_S2/ MicroPython]. * These instructions are for installation from a Linux computer * Download the [https://github.com/espressif/esptool esptool from here] onto your Linux computer * Obtain a USB to USB-C cable * Plug the USB end into the Linux Computer * Plug the USB-C end into the ESP32-S2 Mini * Run "sudo tail -f /var/log/messages" on your Linux computer * Press and hold..."

2024-12-04T00:12:01Z

Created page with "Category:SigOS == ESP32 S2 Mini == Installing [https://micropython.org/download/ESP32_GENERIC_S2/ MicroPython]. * These instructions are for installation from a Linux computer * Download the [https://github.com/espressif/esptool esptool from here] onto your Linux computer * Obtain a USB to USB-C cable * Plug the USB end into the Linux Computer * Plug the USB-C end into the ESP32-S2 Mini * Run "sudo tail -f /var/log/messages" on your Linux computer * Press and hold..."

New page

[[Category:SigOS]]

== ESP32 S2 Mini ==

Installing [https://micropython.org/download/ESP32_GENERIC_S2/ MicroPython].

* These instructions are for installation from a Linux computer
* Download the [https://github.com/espressif/esptool esptool from here] onto your Linux computer
* Obtain a USB to USB-C cable
* Plug the USB end into the Linux Computer
* Plug the USB-C end into the ESP32-S2 Mini
* Run "sudo tail -f /var/log/messages" on your Linux computer
* Press and hold the "0" button on the ESP32-S2 Mini, then "tap" the "Reset" button
* You should see the Linux computer recognize the board in the output of /var/log/messages
** It will look something like this:
<pre>
Dec 4 00:01:14 onvakkiock kernel: cdc_acm 1-3:1.0: ttyACM0: USB ACM device
Dec 4 00:01:14 onvakkiock mtp-probe[2249351]: checking bus 1, device 20: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3"
Dec 4 00:01:14 onvakkiock mtp-probe[2249351]: bus: 1, device: 20 was not an MTP device
Dec 4 00:01:14 onvakkiock mtp-probe[2249354]: checking bus 1, device 20: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3"
Dec 4 00:01:14 onvakkiock mtp-probe[2249354]: bus: 1, device: 20 was not an MTP device
Dec 4 00:01:15 onvakkiock python3[1159]: 2024-12-04 00:01:15,736 - root - INFO - parse_stats() XDP multiqueue detected.
</pre>
* If you are putting MicroPython on your board for the first time then you should first erase the entire flash using:
<pre>
esptool.py --chip esp32s2 --port /dev/ttyACM0 erase_flash
</pre>
* Download the latest released version of [https://micropython.org/download/ESP32_GENERIC_S2/ MicroPython for the ESP32-S2 Mini from here]. You will want the file ending with ".bin"
* Run the following command to install MicroPyton onto the ESP32-S2 Mini, replacing the filename with the .bin file you just downloaded
<pre>
esptool.py --chip esp32s2 --port /dev/ttyACM0 write_flash -z 0x1000 ESP32_GENERIC_S2-20241129-v1.24.1.bin
</pre>
* The results will look something like this:
<pre>
[dnevil@onvakkiock MicroPython]$ esptool.py --chip esp32s2 --port /dev/ttyACM0 write_flash -z 0x1000 ESP32_GENERIC_S2-20241129-v1.24.1.bin
esptool.py v4.7.0
Serial port /dev/ttyACM0
Connecting...
Chip is ESP32-S2FNR2 (revision v1.0)
Features: WiFi, Embedded Flash 4MB, Embedded PSRAM 2MB, ADC and temperature sensor calibration in BLK2 of efuse V2
Crystal is 40MHz
MAC: cc:8d:a2:94:74:0c
Uploading stub...
Running stub...
Stub running...
Configuring flash size...
Flash will be erased from 0x00001000 to 0x0015dfff...
Compressed 1427792 bytes to 935495...
Wrote 1427792 bytes (935495 compressed) at 0x00001000 in 10.8 seconds (effective 1055.6 kbit/s)...
Hash of data verified.

Leaving...
WARNING: ESP32-S2FNR2 (revision v1.0) chip was placed into download mode using GPIO0.
esptool.py can not exit the download mode over USB. To run the app, reset the chip manually.
To suppress this note, set --after option to 'no_reset'.
</pre>