File:CabooseTrucks BrakeShaftAssmby.jpg
Jump to navigation
Jump to search
Size of this preview: 800 × 600 pixels. Other resolutions: 2,560 × 1,920 pixels | 3,264 × 2,448 pixels.
Original file (3,264 × 2,448 pixels, file size: 2 MB, MIME type: image/jpeg)
The two Brake Struts were welded onto the Brake Shaft. Then the 7 inch long Support Shaft was inserted into the holes at the end of the Brake Struts, bent down at the ends, and welded at the ends as well as at the Brake Struts. Photo by Daris A Nevil, July 2015.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 23:57, 27 October 2015 | 3,264 × 2,448 (2 MB) | Dnevil (talk | contribs) | The two Brake Struts were welded onto the Brake Shaft. Then the 7 inch long Support Shaft was inserted into the holes at the end of the Brake Struts, bent down at the ends, and welded at the ends as well as at the Brake Struts. Photo by [[Daris A Nev... |
You cannot overwrite this file.
File usage
The following 2 pages use this file:
- Balanced Air Brakes from Scratch
- File:2015-07-14 23.25.40.jpg (file redirect)