File:Test fitting t bracket ubolt AAR A.jpg
Jump to navigation
Jump to search
Size of this preview: 450 × 600 pixels. Other resolution: 2,448 × 3,264 pixels.
Original file (2,448 × 3,264 pixels, file size: 1.74 MB, MIME type: image/jpeg)
Test fitting the T-brace along with the U-bolt before cutting the extra length off the T-brace. The motor T-brace is attached to the motor block bearings using two nylon lock bolts. Likewise the U-bolt nuts are replaced with nylon lock bolts. The allows the tension on the rubber hose to be adjusted. The U-bolt/rubber tube configuration allows the motor to rotate on the axis as the wheelset moves up and down over the road. Photo by Daris A Nevil, February 2015.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 00:47, 7 March 2015 | 2,448 × 3,264 (1.74 MB) | Dnevil (talk | contribs) | Test fitting the T-brace along with the U-bolt before cutting the extra length off the T-brace. The motor T-brace is attached to the motor block bearings using two nylon lock bolts. Likewise the U-bolt nuts are replaced with nylon lock bolts. The al... |
You cannot overwrite this file.
File usage
The following page uses this file: