Upload log
Jump to navigation
Jump to search
Below is a list of the most recent file uploads. See the gallery of new files for a more visual overview.
- 17:10, 3 December 2020 Dnevil talk contribs uploaded File:2020-12-03 10.42.26.jpg (Using a Sagitta Rule, Step 1: Place the ends of the rail against a wall or other straight edge. Place the Sagitta Rule at the midpoint of the rail, where the distance from the wall is greatest. Photo by Daris A Nevil, December 2020.)
- 22:46, 1 December 2020 Dnevil talk contribs uploaded File:2020-11-28 12.10.50.jpg (Step 1: Place ties on the jig with straight rails on top. Start track screws to hold things in place. Photo by Daris A Nevil, November 2020.)
- 22:43, 1 December 2020 Dnevil talk contribs uploaded a new version of File:2020-11-28 11.39.36.jpg
- 22:33, 1 December 2020 Dnevil talk contribs uploaded File:2020-12-01 16.28.00.jpg (A sagitta rule for directly measuring the radius of 10 foot sections of rail. Photo by Daris A Nevil, December 2020.)
- 17:45, 29 November 2020 Dnevil talk contribs uploaded File:2020-11-28 12.16.06.jpg (Step 2: Clamp the third tie from each end in place. Use two screws to fasten a rail in the middle of the tie plate. Start at one of the clamped ties. Tighten the screws on each tie, making sure the tie is touching the tie stop on the jig. Photo by...)
- 17:41, 29 November 2020 Dnevil talk contribs uploaded File:2020-11-28 11.39.36.jpg (Step 1: Place ties on the jig with straight rails on top. Start track screws to hold things in place. Photo by Daris A Nevil, November 2020.)
- 17:30, 29 November 2020 Dnevil talk contribs uploaded File:2020-11-28 11.41.16.jpg (Step 4: Start at one of the clamped ties and tighten all screws on that tie. The plastic tie plates will help align the tie perpendicular to the curved rail. Make sure one end of the tie touches the tie stop on the jig. Photo by Daris A Nevil, Novem...)
- 17:27, 29 November 2020 Dnevil talk contribs uploaded File:2020-11-28 11.35.17.jpg (Step 3: The gap in the rail is staggered to prevent sagging over time. Two screws are used to attached the end of the rail in the middle of the tie place on the third tie from the end. Do this on both ends. A welding clamp is used to hold these two...)
- 17:23, 29 November 2020 Dnevil talk contribs uploaded File:2020-11-28 11.35.03.jpg (Step 2: Track screws are started but not tightened in this step. Photo by Daris A Nevil, November 2020.)
- 17:20, 29 November 2020 Dnevil talk contribs uploaded a new version of File:2020-11-28 11.23.54.jpg
- 17:18, 29 November 2020 Dnevil talk contribs uploaded File:2020-11-28 11.23.54.jpg (Step 1: ties are placed in the jig with pre-curved aluminum rail on top. Track screws are started but not tightened in this step. Photo by Daris A Nevil, November 2020.)
- 22:37, 22 November 2020 Dnevil talk contribs uploaded File:AlanArmitage DRGW345 pencil-2.jpg (Denver and Rio Grande Western #345 pencil drawing by Alan Armitage. From ebay.com, November 2020.)
- 22:37, 22 November 2020 Dnevil talk contribs uploaded File:AlanArmitage DRGW345 pencil-1.jpg (Denver and Rio Grande Western #345 pencil drawing by Alan Armitage. From ebay.com, November 2020.)
- 22:33, 22 November 2020 Dnevil talk contribs uploaded File:AlanArmitage Concord RR No 31 AMOSKEAG pencil-2.jpg (Concord RR No. 31 (4-4-0) AMOSKEAG pencil drawing by Alan Armitage. From ebay.com, November 2020.)
- 22:32, 22 November 2020 Dnevil talk contribs uploaded File:AlanArmitage Concord RR No 31 AMOSKEAG pencil-1.jpg (Concord RR No. 31 (4-4-0) AMOSKEAG pencil drawing by Alan Armitage. From ebay.com, November 2020.)
- 22:28, 22 November 2020 Dnevil talk contribs uploaded File:AlanArmitage DRGW480 pencil-3.jpg (Denver & Rio Grande Western #480 Class K-36 pencil drawing by Alan Armitage. From ebay.com, November 2020.)
- 22:27, 22 November 2020 Dnevil talk contribs uploaded File:AlanArmitage DRGW480 pencil-2.jpg (Denver & Rio Grande Western #480 Class K-36 pencil drawing by Alan Armitage. From ebay.com, November 2020.)
- 22:27, 22 November 2020 Dnevil talk contribs uploaded File:AlanArmitage DRGW480 pencil-1.jpg (Denver & Rio Grande Western #480 Class K-36 pencil drawing by Alan Armitage. From ebay.com, November 2020.)
- 22:24, 22 November 2020 Dnevil talk contribs uploaded File:AlanArmitage Falk pencil-2.jpg (Elk River Mill & Lumber Co RR Falk 0-4-0 pencil drawing signed by Alan Armiage. From ebay.com, November 2020.)
- 22:23, 22 November 2020 Dnevil talk contribs uploaded File:AlanArmitage Falk pencil-1.jpg (Elk River Mill & Lumber Co RR Falk 0-4-0 pencil drawing by Alan Armiage. From ebay.com, November 2020.)
- 22:15, 22 November 2020 Dnevil talk contribs uploaded File:AlanArmitage CandO Pacific pencil-2.jpg (Chesapeake & Ohio 4-6-2 Pacific, backing board of pencil drawing by Alan Armitage. From ebay.com November 2020.)
- 22:14, 22 November 2020 Dnevil talk contribs uploaded File:AlanArmitage CandO Pacific pencil-1.jpg (Chesapeake & Ohio 4-6-2 Pacific, pencil drawing by Alan Armitage. From ebay.com November 2020.)
- 22:08, 22 November 2020 Dnevil talk contribs uploaded File:AlanArmitage BandM 4117-pencil-3.jpg (Boston & Maine 4117 4-8-2 “Hercules” (Builder: Baldwin 1941), original pen and ink drawing and is signed by the artist, Alan Armitage, lower right. Measurements: 9 1/4” x 18”. From ebay.com, November 2020.)
- 22:07, 22 November 2020 Dnevil talk contribs uploaded File:AlanArmitage BandM 4117-pencil-2.jpg (Boston & Maine 4117 4-8-2 “Hercules” (Builder: Baldwin 1941), original pen and ink drawing and is signed by the artist, Alan Armitage, lower right. Measurements: 9 1/4” x 18”. From ebay.com, November 2020.)
- 21:33, 22 November 2020 Dnevil talk contribs uploaded File:Boston and Maine 4117 Al Armitage-12.jpg (Boston & Maine 4117 in 3/4 inch scale designed by Alan Armitage, from ebay, November 2020.)
- 21:33, 22 November 2020 Dnevil talk contribs uploaded File:Boston and Maine 4117 Al Armitage-11.jpg (Boston & Maine 4117 in 3/4 inch scale designed by Alan Armitage, from ebay, November 2020.)
- 21:32, 22 November 2020 Dnevil talk contribs uploaded File:Boston and Maine 4117 Al Armitage-10.jpg (Boston & Maine 4117 in 3/4 inch scale designed by Alan Armitage, from ebay, November 2020.)
- 21:31, 22 November 2020 Dnevil talk contribs uploaded File:Boston and Maine 4117 Al Armitage-9.jpg (Boston & Maine 4117 in 3/4 inch scale designed by Alan Armitage, from ebay, November 2020.)
- 21:30, 22 November 2020 Dnevil talk contribs uploaded File:Boston and Maine 4117 Al Armitage-8.jpg (Boston & Maine 4117 in 3/4 inch scale designed by Alan Armitage, from ebay, November 2020.)
- 21:30, 22 November 2020 Dnevil talk contribs uploaded File:Boston and Maine 4117 Al Armitage-7.jpg (Boston & Maine 4117 in 3/4 inch scale designed by Alan Armitage, from ebay, November 2020.)
- 21:30, 22 November 2020 Dnevil talk contribs uploaded File:Boston and Maine 4117 Al Armitage-6.jpg (Boston & Maine 4117 in 3/4 inch scale designed by Alan Armitage, from ebay, November 2020.)
- 21:29, 22 November 2020 Dnevil talk contribs uploaded File:Boston and Maine 4117 Al Armitage-5.jpg (Boston & Maine 4117 in 3/4 inch scale designed by Alan Armitage, from ebay, November 2020.)
- 21:29, 22 November 2020 Dnevil talk contribs uploaded File:Boston and Maine 4117 Al Armitage-4.jpg (Boston & Maine 4117 in 3/4 inch scale designed by Alan Armitage, from ebay, November 2020.)
- 21:29, 22 November 2020 Dnevil talk contribs uploaded File:Boston and Maine 4117 Al Armitage-3.jpg (Boston & Maine 4117 in 3/4 inch scale designed by Alan Armitage, from ebay, November 2020.)
- 21:28, 22 November 2020 Dnevil talk contribs uploaded File:Boston and Maine 4117 Al Armitage-2.jpg (Boston & Maine 4117 in 3/4 inch scale designed by Alan Armitage, from ebay, November 2020.)
- 21:28, 22 November 2020 Dnevil talk contribs uploaded File:Boston and Maine 4117 Al Armitage-1.jpg (Boston & Maine 4117 in 3/4 inch scale designed by Alan Armitage, from ebay, November 2020.)
- 13:37, 20 November 2020 Dnevil talk contribs uploaded File:ScottyMogul WayneDavis.JPG (Wayne Davis' "Scotty" Mogul at Iowa Model Steam Engineers meet. From https://www.chaski.org/homemachinist/viewtopic.php?f=8&t=109947&start=12)
- 13:34, 20 November 2020 Dnevil talk contribs uploaded File:ScottyMogul driver.jpg (Driver of a Scotty Mogul. From https://www.chaski.org/homemachinist/viewtopic.php?f=8&t=109947&start=12)
- 13:33, 20 November 2020 Dnevil talk contribs uploaded File:ScottyMogul driver pattern.jpg (Here is the driver pattern for the Scotty Mogal. From https://www.chaski.org/homemachinist/viewtopic.php?f=8&t=109947&start=12)
- 13:31, 20 November 2020 Dnevil talk contribs uploaded File:CarlPurintons LightMogul NELS Past 1B6.jpg (Carl Purinton's original Light Mogul. From http://www.northeastlivesteamers.org/Docs/History/Pictures/CP_Boxford/NELS_Past_1B6.jpg)
- 13:26, 20 November 2020 Dnevil talk contribs uploaded File:Brien 2-6-0.jpg (Paul Brien's build of the "Scotty" Mogul 2-6-0. Photo by Scott Reedy, https://www.chaski.org/homemachinist/viewtopic.php?f=8&t=109947&start=12)
- 08:44, 20 November 2020 Dnevil talk contribs uploaded File:ScottyLightMogul benchtop.jpg (A "Scotty" Light Mogul after rebuild. Photo provided by "ALCOSTEAM", https://www.chaski.org/homemachinist/viewtopic.php?f=8&t=109947)
- 08:36, 20 November 2020 Dnevil talk contribs uploaded File:ScottyLightMogul ErectionDrawing.PNG (Erection Drawing of the "Scotty" Light Mogul.)
- 15:45, 20 October 2020 Dnevil talk contribs uploaded File:DougMassie Northern backyard 1936.jpg (Here is a picture from 1936 of the engine in its original form. The picture was taken on Doug Massie's backyard track. Provided by Steve Bratina.)
- 15:43, 20 October 2020 Dnevil talk contribs uploaded File:MassieNorthernRebuilt by SteveBratina 2020-4.JPG (Massie Northern rebuilt complete. Photo by Steve Bratina, 14 October 2020.)
- 15:43, 20 October 2020 Dnevil talk contribs uploaded File:MassieNorthernRebuilt by SteveBratina 2020-3.JPG (Massie Northern rebuilt complete. Photo by Steve Bratina, 14 October 2020.)
- 15:42, 20 October 2020 Dnevil talk contribs uploaded File:MassieNorthernRebuilt by SteveBratina 2020-2.JPG (Massie Northern rebuilt complete. Photo by Steve Bratina, 14 October 2020.)
- 15:42, 20 October 2020 Dnevil talk contribs uploaded File:MassieNorthernRebuilt by SteveBratina 2020-1.JPG (Massie Northern rebuilt complete. Photo by Steve Bratina, 14 October 2020.)
- 16:59, 29 September 2020 Dnevil talk contribs uploaded File:MartinEvans big smile.jpg (Martin Evans at the throttle of No. 752. From https://www.modelengineeringwebsite.com/Martin_Evans.html)
- 16:55, 29 September 2020 Dnevil talk contribs uploaded File:MartinEvans canadian-type-2-8-0-locomotive-tender-plan.jpeg (Drawing showing front-end modifications for 2-8-0 variation named Buffalo. From https://www.sarikhobbies.com/product/canadian-type-2-8-0-locomotive-tender-plan/)
- 16:48, 29 September 2020 Dnevil talk contribs uploaded File:MartinEvans Caribou ErectionDrawing.gif (Erection drawing of Martin Evan's Caribou, from AJ Reeves website, https://www.ajreeves.com/11089.html)
- 22:54, 27 September 2020 Dnevil talk contribs uploaded File:WallyRibbeck ModelRailroader Oct1948 0004.jpg (Wally Ribbeck at the controls of his Hudson. Wally's automobile furnishes blower air to start fires in his and Bill's engines until engines' blowers take over. Photo by Bill Michaels, from Model Railroader, October 1948.)
- 22:50, 27 September 2020 Dnevil talk contribs uploaded File:BillMichaels Engineer ModelRailroader Oct1948 0004.jpg (Steam's up and clear track ahead. Sensitive throttle will spin drivers if not skillfully handled. Photo by C.P. Fox, from Model Railroader, October 1948.)
- 22:44, 27 September 2020 Dnevil talk contribs uploaded File:BillMichaels MachineShop ModelRailroader Oct1948 0003.jpg (Removing some excess metal from a tender truck side frame. A B&O Pacific is partly visible above. Photo by C.P. Fox, from Model Railroader, October 1948.)
- 22:39, 27 September 2020 Dnevil talk contribs uploaded File:BillMichaels OperatingHudson ModelRailroader Oct1948 0002.jpg (Bill operates tender hand pump to replenish boiler water. Note throttle handle projecting above the roofless cab. Photo by C.P. Fox, from Model Railroader, October 1948.)
- 22:34, 27 September 2020 Dnevil talk contribs uploaded File:BlllMichaels Hudson ModelRailroader Oct1948 0001.jpg (Bill's Hudson as it neared completion in his shop. Tank under running board is the whistle. Other live steam engine and mainframe are seen nearby. Photo by C.P. Fox, from Model Railroader, October 1948.)
- 21:48, 27 September 2020 Dnevil talk contribs uploaded File:ModelRailroader Oct1948.jpg (Bill Michaels inspects a live steam boiler. Cover page of Model Railroader magazine, October 1948. Photo possibly by C.P. Fox.)
- 21:57, 24 September 2020 Dnevil talk contribs uploaded File:MurrayBennell WindsorOntario-4.PNG (Murray Bennell was a regular at Windsor also. When he had his engine to the point of running, he borrowed the Maisie tender from Ted Lee and ran his engine at the meets. Eventually, Murray would finish the engine and tender, using the steel sheet from...)
- 21:56, 24 September 2020 Dnevil talk contribs uploaded File:MurrayBennell WindsorOntario-3.PNG (Murray Bennell was a regular at Windsor also. When he had his engine to the point of running, he borrowed the Maisie tender from Ted Lee and ran his engine at the meets. Eventually, Murray would finish the engine and tender, using the steel sheet from...)
- 21:56, 24 September 2020 Dnevil talk contribs uploaded File:MurrayBennell WindsorOntario-2.PNG (Murray Bennell was a regular at Windsor also. When he had his engine to the point of running, he borrowed the Maisie tender from Ted Lee and ran his engine at the meets. Eventually, Murray would finish the engine and tender, using the steel sheet from...)
- 21:56, 24 September 2020 Dnevil talk contribs uploaded File:MurrayBennell WindsorOntario-1.PNG (Murray Bennell was a regular at Windsor also. When he had his engine to the point of running, he borrowed the Maisie tender from Ted Lee and ran his engine at the meets. Eventually, Murray would finish the engine and tender, using the steel sheet from...)
- 21:46, 24 September 2020 Dnevil talk contribs uploaded File:LarryEdwards Atlantic WindsorOntarioTrack-2.PNG (Larry Edwards of Green Bay Wisconsin was a regular visitor to the track in the 1960's. His 3/4 inch Atlantic was well traveled and a great steamer. The late Ed Loomie eventually ended up with this engine and after his passing, it disappeared into the w...)
- 21:46, 24 September 2020 Dnevil talk contribs uploaded File:LarryEdwards Atlantic WindsorOntarioTrack-1.PNG (Larry Edwards of Green Bay Wisconsin was a regular visitor to the track in the 1960's. His 3/4 inch Atlantic was well traveled and a great steamer. The late Ed Loomie eventually ended up with this engine and after his passing, it disappeared into the w...)
- 21:37, 24 September 2020 Dnevil talk contribs uploaded File:FrankBirch JackPrest JackHart WindsorOntarioTrack.PNG (Frank Birch, Jack Prest and Jack Hart having a discussion. Jack Prest was the BLS rep for Canada at the time until his untimely passing. Taken at the Windsor Ontario track. Photo by Steve Bratina.)
- 21:33, 24 September 2020 Dnevil talk contribs uploaded File:EricCorbett WindsorOntarioTrack-1.PNG (One of the regulars at the meet was Eric Corbett. He built this Coventry B&O 0-6-0 and for never finished it beyond how it looks here. It ran like a Swiss watch but he just never had the desire to complete the details. He was always a fun guy to have...)
- 21:33, 24 September 2020 Dnevil talk contribs uploaded File:EricCorbett WindsorOntarioTrack-2.PNG (One of the regulars at the meet was Eric Corbett. He built this Coventry B&O 0-6-0 and for never finished it beyond how it looks here. It ran like a Swiss watch but he just never had the desire to complete the details. He was always a fun guy to have...)
- 21:24, 24 September 2020 Dnevil talk contribs uploaded File:JackHart America WindsorOntarioTrack-4.PNG (Jack Hart's first engine was a 1/2 inch scale Hudson. His next was this beautiful 3/4 inch 4-4-0. It ran for many years on coal but was eventually changed over to propane. Jack worked in the tool room at Ford in Windsor. Photo by Steve Bratina.)
- 21:23, 24 September 2020 Dnevil talk contribs uploaded File:JackHart America WindsorOntarioTrack-3.PNG (Jack hart's first engine was a 1/2 inch scale Hudson. His next was this beautiful 3/4 inch 4-4-0. It ran for many years on coal but was eventually changed over to propane. Jack worked in the tool room at Ford in Windsor. Photo by Steve Bratina.)
- 21:23, 24 September 2020 Dnevil talk contribs uploaded File:JackHart America WindsorOntarioTrack-2.PNG (Jack hart's first engine was a 1/2 inch scale Hudson. His next was this beautiful 3/4 inch 4-4-0. It ran for many years on coal but was eventually changed over to propane. Jack worked in the tool room at Ford in Windsor. Photo by Steve Bratina.)
- 21:22, 24 September 2020 Dnevil talk contribs uploaded File:JackHart America WindsorOntarioTrack-1.PNG (Jack hart's first engine was a 1/2 inch scale Hudson. His next was this beautiful 3/4 inch 4-4-0. It ran for many years on coal but was eventually changed over to propane. Jack worked in the tool room at Ford in Windsor. Photo by Steve Bratina.)
- 21:12, 24 September 2020 Dnevil talk contribs uploaded File:HenryPeotter at WindsorOntario-2.PNG (Henry E Peotter's locomotive. His initials were used to identify his railroad on the tender. Photo by Steve Bratina.)
- 21:11, 24 September 2020 Dnevil talk contribs uploaded File:HenryPeotter at WindsorOntario-1.PNG (Henry E Peotter and his locomotive. His initials were used to identify his railroad on the tender. Photo taken at the Windsor Ontario track. Photo by Steve Bratiana.)
- 21:08, 24 September 2020 Dnevil talk contribs uploaded File:HenryPeotter WIndsorOntarioTrack.PNG (Henry Peotter built this engine which I was told ran at 200 psi. Taken at the Windsor Ontario track. Photo by Steve Bratina.)
- 21:04, 24 September 2020 Dnevil talk contribs uploaded File:DaveJarvis WindsorOntarioTrack.PNG (Dave Jarvis running his re-gauged Mountain Locomotive. George Murray made a 3-1/2 inch gauge engine out of a 2-1/2 inch gauge job and sold it to Dave. Photo by Steve Bratina.)
- 20:57, 24 September 2020 Dnevil talk contribs uploaded File:JackHart WindsorOntarioTrack.PNG (Jack Hart driving Harry Gerrie's engine then owned by Jack Lilburn. Windsor Ontario track. Photo by Steve Bratina.)
- 20:49, 24 September 2020 Dnevil talk contribs uploaded File:StanGrigg Northern basement.jpg (Stan Grigg's 1 inch scale CNR Northern. The engine had a banjo frame which limited the radius it could negotiate. Photo by Steve Bratina.)
- 20:38, 24 September 2020 Dnevil talk contribs uploaded File:AlRoedding UP Northern Windsor 1960s-3.PNG (Al Roedding's UP Northern at the Windsor Ontario track, early 1960's. Photo by Steve Bratina.)
- 20:37, 24 September 2020 Dnevil talk contribs uploaded File:AlRoedding UP Northern Windsor 1960s-1.PNG (Al Roedding's UP Northern at the Windsor Ontario track, early 1960's. Photo by Steve Bratina.)
- 20:35, 24 September 2020 Dnevil talk contribs uploaded File:AlRoedding UP Northern Windsor 1960s-2.PNG (Al Roedding at the throttle of his UP Northern at the Windsor Ontario track, early 1960's. Photo by Steve Bratina.)
- 21:16, 20 September 2020 Dnevil talk contribs uploaded File:WallaceRibbeck Hudson.jpg (Wallace Ribbeck's Hudson on display at the Tennessee Valley Railroad. From https://www.chaski.org/homemachinist/viewtopic.php?f=8&t=109746&start=36)
- 20:58, 20 September 2020 Dnevil talk contribs uploaded File:BillMichaels 2.5 Hudson 2.jpeg (Bill Michael's 2.5 inch gauge Hudson. Photo by John Scarmozza. From https://www.chaski.org/homemachinist/viewtopic.php?f=8&t=109746&start=36)
- 20:57, 20 September 2020 Dnevil talk contribs uploaded File:BillMichaels 2.5 Hudson 1.jpeg (Bill Michael's 2.5 inch gauge Hudson. Photo by John Scarmozza. From https://www.chaski.org/homemachinist/viewtopic.php?f=8&t=109746&start=36)
- 15:22, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 6.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 15:19, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 15.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 15:17, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 14.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 15:16, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 13.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 15:16, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 12.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 15:15, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 11.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 15:15, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 10.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 15:00, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 9.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 15:00, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 8.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 14:58, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 7.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 14:55, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 5.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 14:55, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 4.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 14:55, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 3.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 14:54, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 2.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 14:54, 20 September 2020 Dnevil talk contribs uploaded File:DouglasMassie Northern rebuild by SteveBratina 2020 1.JPG (Steve Bratina undertook to rebuild Douglas Massie's 3/4 inch scale Norther in 2018-2019. Photos by Steve Bratina.)
- 14:41, 20 September 2020 Dnevil talk contribs uploaded File:AlRoedding Northern.JPG (Al Roedding's 4-8-4 Northern in 3/4 inch scale. Photo by Steve Bratina.)
- 14:34, 20 September 2020 Dnevil talk contribs uploaded File:StanGriggs Niagara rebuild by SteveBratina Sept2020.JPG (Stan Griggs' 3/4 inch scale Niagara fresh from the Steve Bratina's rebuild shop, September 2020. Photo by Steve Bratina.)
- 14:24, 20 September 2020 Dnevil talk contribs uploaded File:Centerville and Southwestern RR 1952 6.jpg (Centerville and Southwestern Railroad circa 1952. From https://www.chaski.org/homemachinist/viewtopic.php?f=33&t=109853)
- 14:23, 20 September 2020 Dnevil talk contribs uploaded File:Centerville and Southwestern RR 1952 5.jpg (Centerville and Southwestern Railroad circa 1952. From https://www.chaski.org/homemachinist/viewtopic.php?f=33&t=109853)
- 14:23, 20 September 2020 Dnevil talk contribs uploaded File:Centerville and Southwestern RR 1952 4.jpg (Centerville and Southwestern Railroad circa 1952. From https://www.chaski.org/homemachinist/viewtopic.php?f=33&t=109853)
- 14:23, 20 September 2020 Dnevil talk contribs uploaded File:Centerville and Southwestern RR 1952 3.jpg (Centerville and Southwestern Railroad circa 1952. From https://www.chaski.org/homemachinist/viewtopic.php?f=33&t=109853)
- 14:22, 20 September 2020 Dnevil talk contribs uploaded File:Centerville and Southwestern RR 1952 2.jpg (Centerville and Southwestern Railroad circa 1952. From https://www.chaski.org/homemachinist/viewtopic.php?f=33&t=109853)
- 14:22, 20 September 2020 Dnevil talk contribs uploaded File:Centerville and Southwestern RR 1952 1.jpg (Centerville and Southwestern Railroad circa 1952. From https://www.chaski.org/homemachinist/viewtopic.php?f=33&t=109853)
- 07:21, 20 September 2020 Dnevil talk contribs uploaded File:HarryHaas LiveSteam NovDec1995.jpg (Cover of Live Steam Magazine for November/December 1995, Featuring Harry Haas.)
- 07:15, 20 September 2020 Dnevil talk contribs uploaded File:HarryHaas American by GregCasford 5.jpg (4-4-0 American based on Allen Models design built by Harry Hass in the early 1980's. Photos by Greg Casford, posted on Facebook 18 Sept 2020.)
- 07:14, 20 September 2020 Dnevil talk contribs uploaded File:HarryHaas American by GregCasford 3.jpg (4-4-0 American based on Allen Models design built by Harry Hass in the early 1980's. Photos by Greg Casford, posted on Facebook 18 Sept 2020.)
- 07:14, 20 September 2020 Dnevil talk contribs uploaded File:HarryHaas American by GregCasford 2.jpg (4-4-0 American based on Allen Models design built by Harry Hass in the early 1980's. Photos by Greg Casford, posted on Facebook 18 Sept 2020.)
- 07:14, 20 September 2020 Dnevil talk contribs uploaded File:HarryHaas American by GregCasford 1.jpg (4-4-0 American based on Allen Models design built by Harry Hass in the early 1980's. Photos by Greg Casford, posted on Facebook 18 Sept 2020.)
- 07:46, 31 August 2020 Dnevil talk contribs uploaded a new version of File:DougMassie WLB Page3.JPG
- 07:46, 31 August 2020 Dnevil talk contribs uploaded a new version of File:DougMassie WLB Page2.JPG
- 07:45, 31 August 2020 Dnevil talk contribs uploaded a new version of File:DougMassie WLB Page1.JPG
- 19:12, 30 August 2020 Dnevil talk contribs uploaded a new version of File:StanGriggs Northern inBasement.jpg (This is a picture of Al Roedding and Dave Jarvis with Al's 3/4 inch UP Northern. This picture was taken in the 1960's at the Windsor Ontario track. Provided by Steve Bratina.)
- 19:07, 30 August 2020 Dnevil talk contribs uploaded File:StanGriggs Northern inBasement.jpg (Here is a picture of Stan Grigg's engine in his basement in Greensville Ontario. Provided by Steve Bratina.)
- 18:59, 30 August 2020 Dnevil talk contribs uploaded File:MeridethMassie MontrealTrack.JPG (Here is another picture of the Douglas Massie Northern. It is being driven by his son Merideth Massie at the track in Montreal. This picture shows the engine with the original boiler, Coventry power reverse and steam driven cylinder drains. The drains...)
- 08:06, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Photo7.jpg (Photo 7 from Doug Massie's letter included in the 1934 Wandering Locomotive Book. Provided by Steve Bratina and John Kurdzionak.)
- 08:06, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Photo6.jpg (Photo 6 from Doug Massie's letter included in the 1934 Wandering Locomotive Book. Provided by Steve Bratina and John Kurdzionak.)
- 08:05, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Photo5.jpg (Photo 5 from Doug Massie's letter included in the 1934 Wandering Locomotive Book. Provided by Steve Bratina and John Kurdzionak.)
- 08:05, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Photo4.jpg (Photo 4 from Doug Massie's letter included in the 1934 Wandering Locomotive Book. Provided by Steve Bratina and John Kurdzionak.)
- 08:05, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Photo3.jpg (Photo 3 from Doug Massie's letter included in the 1934 Wandering Locomotive Book. Provided by Steve Bratina and John Kurdzionak.)
- 08:04, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Photo2.jpg (Photo 2 from Doug Massie's letter included in the 1934 Wandering Locomotive Book. Provided by Steve Bratina and John Kurdzionak.)
- 08:04, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Photo1.jpg (Photo 1 from Doug Massie's letter included in the 1934 Wandering Locomotive Book. Provided by Steve Bratina and John Kurdzionak.)
- 08:01, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Page3.JPG (Letter by Doug Massie that was included in one of the original Wandering Locomotive Books of 1934. Provided by Steve Bratina and John Kurdzionak.)
- 08:00, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Page2.JPG (Letter by Doug Massie that was included in one of the original Wandering Locomotive Books of 1934. Provided by Steve Bratina and John Kurdzionak.)
- 08:00, 27 August 2020 Dnevil talk contribs uploaded File:DougMassie WLB Page1.JPG (Letter by Doug Massie that was included in one of the original Wandering Locomotive Books of 1934. Provided by Steve Bratina and John Kurdzionak.)
- 11:39, 26 August 2020 Dnevil talk contribs uploaded File:Rocky Mountain Rails Track Panel Jig disassembled ready for storage.jpg (A key feature of the track jig is that it can be easily disassembled and stored. Photo by Charles Field.)
- 11:38, 26 August 2020 Dnevil talk contribs uploaded File:Rocky Mountain Rails track jig joint.jpg (Tie stops welded to support beams. Photo by Charles Field.)
- 11:37, 26 August 2020 Dnevil talk contribs uploaded File:Rocky Mountain Rails finish track panel jig.jpg (Completed track panel jig. Photo by Charles Field.)
- 11:36, 26 August 2020 Dnevil talk contribs uploaded File:Rocky Mountain Rails club Track Panel Jig with results July 2020.jpg (Track jig with several completed track panels. Photo by Charles Field.)
- 11:34, 26 August 2020 Dnevil talk contribs uploaded File:Rocky Mount Rails track jig added support to tie stop.jpg (Charles added a small support brace for the tie retention bar. Photo by Charles Field.)
- 11:33, 26 August 2020 Dnevil talk contribs uploaded File:CharlesField TrackJig RetentionPin.jpg (Retention Pin holds the two sections of the the track jig together. Photo by Charles Field.)
- 11:31, 26 August 2020 Dnevil talk contribs uploaded File:CharlesField TrackJig FillWelds.jpg (The Support Joints have been fill-welded to the support beams. Photo by Charles Field.)
- 11:29, 26 August 2020 Dnevil talk contribs uploaded File:CharlesField TrackJig SupportJoint.jpg (Indication of the length of the Support Joint for Charles Field's track jig. Photo by Charles Field.)
- 11:27, 26 August 2020 Dnevil talk contribs uploaded File:CharlesField TrackJig 2020-03-30 07.16.24.jpg (Drawings for Charles Field's Track Jig. Photo by Charles Field.)
- 10:30, 26 August 2020 Dnevil talk contribs uploaded File:2020-03-30 07.16.21.jpg (Raw material for constructing Charles Field's Track Panel Jig. Photo by Charles Field.)
- 10:29, 26 August 2020 Dnevil talk contribs uploaded File:CharlesField TrackPanelJig 2020-03-30 07.16.18.png (Charles Field's Track Panel Jig. Photo by Charles Field. Used with permission.)
- 22:06, 23 August 2020 Dnevil talk contribs uploaded File:South Haven Club 1987-4.jpg (South Haven Park, Suffolk County, NY 1987)
- 22:06, 23 August 2020 Dnevil talk contribs uploaded File:South Haven Club 1987-3.jpg (South Haven Park, Suffolk County, NY 1987)
- 22:05, 23 August 2020 Dnevil talk contribs uploaded File:South Haven Club 1987-2.jpg (South Haven Park, Suffolk County, NY 1987)
- 22:05, 23 August 2020 Dnevil talk contribs uploaded File:South Haven Club 1987-1.jpg (South Haven Park, Suffolk County, NY 1987)
- 21:51, 23 August 2020 Dnevil talk contribs uploaded File:Laird-McCauley CNC Wheel Profiler 3.jpeg (In the bottom center of the picture the stepper motor driving the Y axis can be seen. Photo by Bill Laird.)
- 21:49, 23 August 2020 Dnevil talk contribs uploaded File:Laird-McCauley CNC Wheel Profiler 2.jpeg (In the close up picture you can see a wheel being profiled on the far left of the picture. The black square object on the far right is the stepper motor that drives the X axis. Photo by Bill Laird.)
- 21:40, 23 August 2020 Dnevil talk contribs uploaded File:Laird-McCauley CNC Wheel Profiler.JPG (Laird-McCauley CNC Wheel Profiler. Photo by Bill Laird.)
- 14:42, 23 August 2020 Dnevil talk contribs uploaded File:Houston Live Steamers Golden Spike.jpg
- 12:56, 23 August 2020 Dnevil talk contribs uploaded File:Cox-DeVerter Wedding - Abilene Reporter News 19570903.jpg (Announcement of Cox-DeVerter Wedding as appared in The Abilene Reporter News, 3 September 1957)
- 12:52, 23 August 2020 Dnevil talk contribs uploaded File:Houston North Shore front cover.jpg (Cover of "Houston North Shore" by Charles C. Robinson and Paul L. DeVerter II. From https://www.amazon.com/gp/product/0915348330/ref=ppx_od_dt_b_asin_image_s00?ie=UTF8&psc=1)
- 10:56, 19 August 2020 Dnevil talk contribs uploaded a new version of File:Wintergatan drilling hole.PNG (Drilling a hole into a center punched divot produces an accurate placement of the hole. From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:54, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan center punch for drilling hole.PNG (Using the center punch to mark the exact location of a hole in preparation for drilling. From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:50, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan rounding corner 2.PNG (Adjust the block closer and closer each pass until the desire radius is obtained. From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:50, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan rounding corner 1.PNG (Clamp the block jig on the grinder bed so that the linkage does not touch the wheel when perpendicular. From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:48, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan leave drill embedded in wood block.PNG (Leave the drill bit embedded in the wood block. From From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:48, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan block drill jig for rounding corner.PNG (Creating a jig from wood block and drill bit for rounding linkage corner. From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:46, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan drilling hole.PNG (Drilling hole in center-punched steel. From https://www.youtube.com/watch?v=UENil4T8mXM)
- 10:41, 19 August 2020 Dnevil talk contribs uploaded File:Wintergatan Scribing with Caliper.PNG (Using a caliper to directly scribe a layout line on steel. From https://youtu.be/UENil4T8mXM?t=306)
- 09:30, 18 August 2020 Dnevil talk contribs uploaded File:Scott and Cindy Weatherford pose in front of BNSF 3942.jpg (Scott and Cindy Weatherford pose in front of BNSF 3942.)
- 09:11, 18 August 2020 Dnevil talk contribs uploaded File:Scott and Cindy Weatherford August 2020.jpg (Scott and Cindy Weatherford, August 2020. Photo by Deb Weatherford. From Facebook.)
- 08:40, 17 August 2020 Dnevil talk contribs uploaded File:Stan Grigg Niagara first burner test by Steve Bratina 2020.JPG (Stan Grigg Niagara after reassembly by Steve Bratina, on the stand for first steam and burner test August 2020. Photo by Steve Bratina.)
- 08:39, 17 August 2020 Dnevil talk contribs uploaded File:Stan Grigg Niagara with Steve Bratina tender 2018.JPG (Stan Grigg's Niagaram with Steve Bratina's centipede tender built several years ago. Photo taken 2018 by Steve Bratina.)
- 08:37, 17 August 2020 Dnevil talk contribs uploaded File:Stag Grigg Niagara reassembly by Steve Bratina 2017.JPG (The Stan Grigg built Niagara in Steve Bratina's workshop, 2017. Photo by Steve Bratina.)
- 08:35, 17 August 2020 Dnevil talk contribs uploaded File:Stan Grigg Niagara basement 1960.JPG (A 3/4 inch scale Niagara built by Stan Grigg displayed in his basement, about 1960. Photo provided by Steve Bratina.)
- 15:28, 11 August 2020 Dnevil talk contribs uploaded File:Three quarter Atlantic on high line in Charlotte NC Oct 1967.jpg (A 4-4-2 Atlantic in three-quarter scale on high-line in Charlotte, North Caroline, October 1967. From eBay.com. Slide indicated the location and date.)
- 15:17, 11 August 2020 Dnevil talk contribs uploaded File:Baltimore and Ohio grasshopper unknown June 1970.jpg (Baltimore and Ohio "grasshopper" locomotive, unknown builder, unknown location, unknown scale. From eBay.com, August 2020. Seller stated that the slide was stamped June 1970.)
- 15:14, 11 August 2020 Dnevil talk contribs uploaded File:Barnfather No 870 unknown May 1961.jpg (Unknown photo from eBay, August 2020. Note that Brenton Barnfather's tote box is in the background. The seller stated photo was taken May 1961.)
- 14:59, 11 August 2020 Dnevil talk contribs uploaded File:American No 486 high line three quarter June 1964.jpg (A 4-4-0 American No 486 in three quarter scale on high-line. Unknown people and unknown location. From eBay.com, August 2020. Seller stated photo was taken June 1964.)
- 14:56, 11 August 2020 Dnevil talk contribs uploaded File:Hudson No 3500 three quarter unknown location and engineer 1950s.jpg (A three-quarter inch scale Hudson No 3500 on high-line with unknown engineer, unknown location. From eBay.com. Seller stated the slide was from the 1950s.)
- 14:54, 11 August 2020 Dnevil talk contribs uploaded File:Ginny three quarter highline 1950s.jpg ("Ginny" 0-4-0 on three-quarter inch scale high-line. Unknown location and engineer. From eBay.com, August 2020. Seller stated the slide was from the 1950s.)
- 14:49, 11 August 2020 Dnevil talk contribs uploaded File:Unknown loco and engineer three quarter ebay.jpg (Unknown locomotive and engineer on three-quarter inch scale high-line. Could this be Charlotte, NC? From eBay.com, August 2020. Seller states this slide was from the 1950s.)
- 14:19, 11 August 2020 Dnevil talk contribs uploaded File:New Haven 711 at PVLS Oct 1961.jpg (New Haven locomotive at Pennsylvania Live Steamers track. From eBay, August 2020. Seller stated photo was taken October 1961.)
- 13:36, 11 August 2020 Dnevil talk contribs uploaded File:Reading No 1157 Camelback June 1964.jpg (A 3/4 inch scale Reading Camelback No 1157 waits on highline. From eBay, August 2020. Seller stated photo was taken June 1964.)
- 13:15, 11 August 2020 Dnevil talk contribs uploaded File:Reading No 176 Oct 1961.jpg (Three-quarter inch scale Reading No 176. From eBay, August 2020. Seller stated photo was taken October 1961.)
- 13:10, 11 August 2020 Dnevil talk contribs uploaded File:New Haven 711 no rider PVLS Oct 1961 ebay.jpg (New Haven locomotive at Pennsylvania Live Steamers track. From eBay, August 2020. Seller stated photo was taken October 1961.)
- 13:09, 11 August 2020 Dnevil talk contribs uploaded File:PVLS New Haven ebay Oct 1961.jpg (New Haven locomotive at Pennsylvania Live Steamers track. From eBay, August 2020. Seller stated photo was taken October 1961.)
- 13:06, 11 August 2020 Dnevil talk contribs uploaded File:Grand Scale unknown ebay May 1954.jpg (Unknown location and people. From eBay, August 2020. Seller stated photo was taken May 2954.)
- 13:05, 11 August 2020 Dnevil talk contribs uploaded File:Boston and Maine 3200 unknown close inspection.jpg (Unknown location, locomotive and people. From eBay, August 2020. Seller stated the slide had red border, placing its date in the 1950's.)
- 13:04, 11 August 2020 Dnevil talk contribs uploaded File:Boston and Maine 3200 unknown.jpg (Unknown location, locomotive and people. From eBay, August 2020. Seller stated the slide had red border, placing its date in the 1950's.)
- 12:57, 11 August 2020 Dnevil talk contribs uploaded File:Unknown location loco and people 1950s.jpg (Unknown location, locomotive and people. From eBay, August 2020. Seller stated the slide had red border, placing its date in the 1950's.)
- 12:56, 11 August 2020 Dnevil talk contribs uploaded File:Unknown locomotive and engineers May 1961.jpg (Unknown location, locomotive and engineers. From eBay, August 2020. Seller stated that photo was taken May 1961.)
- 12:54, 11 August 2020 Dnevil talk contribs uploaded File:Barnfather May 1961 unknown.jpg (Unknown photo from eBay, August 2020. Note that Brenton Barnfather's tote box is in the background. The seller stated photo was taken May 1961.)
- 12:47, 11 August 2020 Dnevil talk contribs uploaded File:SouthHavenLiveSteamPark ShirleyNY 1987-6.jpg (South Haven Live Steam Parker, Shirley, New York, 1987. From eBay, August 2020.)
- 12:47, 11 August 2020 Dnevil talk contribs uploaded File:SouthHavenLiveSteamPark ShirleyNY 1987-5.jpg (South Haven Live Steam Parker, Shirley, New York, 1987. From eBay, August 2020.)
- 12:46, 11 August 2020 Dnevil talk contribs uploaded File:SouthHavenLiveSteamPark ShirleyNY 1987-4.jpg (South Haven Live Steam Parker, Shirley, New York, 1987. From eBay, August 2020.)
- 12:46, 11 August 2020 Dnevil talk contribs uploaded File:SouthHavenLiveSteamPark ShirleyNY 1987-3.jpg (South Haven Live Steam Parker, Shirley, New York, 1987. From eBay, August 2020.)
- 12:44, 11 August 2020 Dnevil talk contribs uploaded File:SouthHavenLiveSteamPark ShirleyNY 1987-2.jpg (South Haven Live Steam Parker, Shirley, New York, 1987. From eBay, August 2020.)
- 12:44, 11 August 2020 Dnevil talk contribs uploaded File:SouthHavenLiveSteamPark ShirleyNY 1987-1.jpg (South Haven Live Steam Parker, Shirley, New York, 1987. From eBay, August 2020.)
- 22:22, 4 August 2020 Dnevil talk contribs uploaded File:Henry Hospers Royal Scot by Steve Bratina 2.JPG (Henry Hosper's 3/4 inch scale Royal Scot with Steve Bratina at the throttle on his home track, July 2020. Photo provided by Steve Bratina.)
- 22:22, 4 August 2020 Dnevil talk contribs uploaded File:Henry Hospers Royal Scot by Steve Bratina.JPG (Henry Hosper's 3/4 inch scale Royal Scot with Steve Bratina at the throttle on his home track, July 2020. Photo provided by Steve Bratina.)
- 10:20, 3 August 2020 Dnevil talk contribs uploaded File:OMW-wheel-gauge.jpg (OMW Wheel Gauge for 1.5 inch scale, photo by Doug Blodgett, August 2020.)
- 12:02, 30 July 2020 Dnevil talk contribs uploaded File:Civil engineering bookcover back.jpg (Back cover for "Civil Engineering for Outdoor Railroads", Volume 1, by Douglas van Veelen)
- 12:01, 30 July 2020 Dnevil talk contribs uploaded File:Civil engineering bookcover vol3.jpg (Cover for "Civil Engineering for Outdoor Railroads", Volume 3, by Douglas van Veelen)
- 11:22, 30 July 2020 Dnevil talk contribs uploaded a new version of File:Civil engineering bookcover small.jpg
- 10:13, 30 July 2020 Dnevil talk contribs uploaded File:Cev2 front cover.jpg (Cover for "Civil Engineering for Outdoor Railroads", Volume 2, by Douglas van Veelen)
- 10:12, 30 July 2020 Dnevil talk contribs uploaded File:Civil engineering bookcover small.jpg (Cover for "Civil Engineering for Outdoor Railroads", Volume 1, by Douglas van Veelen)
- 21:42, 29 July 2020 Dnevil talk contribs uploaded File:Wooden Ballast Tipple 2020-01-03 22.37.16.jpg (Wooden ballast tipple, from Facebook, January 2020.)
- 21:42, 29 July 2020 Dnevil talk contribs uploaded File:Wooden Ballast Tipple 2020-01-03 22.37.12.jpg (Wooden ballast tipple, from Facebook, January 2020.)
- 21:41, 29 July 2020 Dnevil talk contribs uploaded File:Wooden Ballast Tipple 2020-01-03 22.37.08.jpg (Wooden ballast tipple, from Facebook, January 2020.)
- 21:41, 29 July 2020 Dnevil talk contribs uploaded File:Wooden Ballast Tipple 2020-01-03 22.37.05.jpg (Wooden ballast tipple, from Facebook, January 2020.)
- 12:52, 26 July 2020 Dnevil talk contribs uploaded File:Proper application of Ballast photo by Jeff Steele.jpg (Proper application of ballast. Photo posted on Facebook by Jeff Steele, July 2020.)
- 12:50, 26 July 2020 Dnevil talk contribs uploaded File:2020-07-26 12.48.35.jpg (Crushed limestone, 3/4 to 5/8 inch, ready for application as ballast for 1.5 inch scale railroad. Photo by Daris A Nevil, July 2020.)
- 12:41, 26 July 2020 Dnevil talk contribs uploaded File:2020-07-25 17.25.34.jpg (Daris Nevil looks on as 16.7 yards are unloaded for the future International & Great Northern Railroad. Photo by Brenda Nevil, July 2020.)
- 12:25, 26 July 2020 Dnevil talk contribs uploaded File:Van H Beckman Railroad Breckenridge TX 1929.jpg (Van H. Beckman's "Casey Jones Railroad" in Breckenridge, Texas, 1929. Photo provided by Shane Murphy.)
- 12:25, 26 July 2020 Dnevil talk contribs uploaded File:Van H Beckman Railroad Breckenridge TX 1929 Casey Jones.jpg (Van H. Beckman's "Casey Jones Railroad" in Breckenridge, Texas, 1929. Photo provided by Shane Murphy.)
- 10:24, 24 July 2020 Dnevil talk contribs uploaded File:Doug Blodgett Mikado Welded Pilot 7.JPG (Welded Pilot for 1.5 inch scale Mikado. Photo by Doug Blodgett.)
- 10:24, 24 July 2020 Dnevil talk contribs uploaded File:Doug Blodgett Mikado Welded Pilot 5.JPG (Welded Pilot for 1.5 inch scale Mikado. Photo by Doug Blodgett.)
- 10:23, 24 July 2020 Dnevil talk contribs uploaded File:Doug Blodgett Mikado Welded Pilot 6.JPG (Welded Pilot for 1.5 inch scale Mikado. Photo by Doug Blodgett.)
- 10:23, 24 July 2020 Dnevil talk contribs uploaded File:Doug Blodgett Mikado Welded Pilot 4.JPG (Welded Pilot for 1.5 inch scale Mikado. Photo by Doug Blodgett.)
- 10:23, 24 July 2020 Dnevil talk contribs uploaded File:Doug Blodgett Mikado Welded Pilot 3.JPG (Welded Pilot for 1.5 inch scale Mikado. Photo by Doug Blodgett.)
- 10:22, 24 July 2020 Dnevil talk contribs uploaded File:Doug Blodgett Mikado Welded Pilot 2.JPG (Welded Pilot for 1.5 inch scale Mikado. Photo by Doug Blodgett.)
- 10:22, 24 July 2020 Dnevil talk contribs uploaded File:Doug Blodgett Mikado Welded Pilot 1.JPG (Welded Pilot for 1.5 inch scale Mikado. Photo by Doug Blodgett.)
- 08:00, 24 July 2020 Dnevil talk contribs uploaded File:LE welded bar stock pilot Stephen Balkum.png (Tough to beat the durability of welded bar-stock. This one is at least 34 years. Photo by Stephen Balkum, posted on steambuilders@halstalking.group, July 2020.)
- 08:02, 1 July 2020 Dnevil talk contribs uploaded File:RobertHolder to AllenModels 19780713.jpg (Memo from Robert Holder to Allen Models requesting catalog, 13 July 1978. Discovered in <i>Live Steam Magazine</i>, June 1977.)
- 09:28, 30 June 2020 Dnevil talk contribs uploaded File:Van Brocklin No. 26 by Gary Crabtree June 2020.JPG (Van Brocklin No 26, photo by Gary Crabtree of London, Kentucky circa 1994. Gary owns the locomotive as of June 2020.)
- 08:52, 23 June 2020 Dnevil talk contribs uploaded File:Browning RR 1998 bertha.jpg (David Hannah III uses the front-end loader to lift one of the steaming bays at the Isomville turntable, 1998. From https://web.archive.org/web/20110519121850/http://www.hals.org/browning.html)
- 08:50, 23 June 2020 Dnevil talk contribs uploaded File:Browning RR 1998 edmm.jpg (Ed Leatherwood, Bruce Roosa, and another new HALS member, 1998. From https://web.archive.org/web/20110519121850/http://www.hals.org/browning.html)
- 08:49, 23 June 2020 Dnevil talk contribs uploaded File:Browning RR 1998 johned.jpg (John Enders, Ed Leatherwood and Bruce Roosa swapping railroad stories, 1998. From https://web.archive.org/web/20110519121850/http://www.hals.org/browning.html)
- 08:48, 23 June 2020 Dnevil talk contribs uploaded File:Browning RR 1998 leemm.jpg (Lee Balkum and Bruce Roosa conferring - equipment is John Enders' SW-style switcher, 1998. From https://web.archive.org/web/20110519121850/http://www.hals.org/browning.html)
- 08:46, 23 June 2020 Dnevil talk contribs uploaded File:Browning RR 1998 reefers.jpg (Tom Stamey at the smoky end of a string of reefers and stock cars, 1998. From https://web.archive.org/web/20110519121850/http://www.hals.org/browning.html)
- 08:45, 23 June 2020 Dnevil talk contribs uploaded File:Browning RR 1998 mikado.jpg (John Hannah at the throttle of the D&RGW Mikado, 1998. From https://web.archive.org/web/20110519121850/http://www.hals.org/browning.html)
- 08:44, 23 June 2020 Dnevil talk contribs uploaded File:Browning RR 1998 station2.jpg (Cody Crawford and Barry Tobias at the station at Sargent, 1998. From https://web.archive.org/web/20110519121850/http://www.hals.org/browning.html)
- 08:43, 23 June 2020 Dnevil talk contribs uploaded File:Browning RR 1998 swchtowr.jpg (Interlocking tower at Isomville, 1998. From https://web.archive.org/web/20110519121850/http://www.hals.org/browning.html)
- 08:42, 23 June 2020 Dnevil talk contribs uploaded File:Browning RR 1998 Station1.jpg (The beautiful Victorian Station at Isomville, 1998. From https://web.archive.org/web/20110519121850/http://www.hals.org/browning.html)
- 08:41, 23 June 2020 Dnevil talk contribs uploaded File:Browning RR 1998 coaltower.jpg (The loco facilities at Browning Station, 1998. From https://web.archive.org/web/20110519121850/http://www.hals.org/browning.html)
- 16:05, 30 April 2020 Dnevil talk contribs uploaded File:Kosters NYC 5749 from Larry Miller III Facebook 20200430.jpg (Larry Miller III posted this photo on Facebook, 30 April 2020. Said, "Stumbled onto this image on Flicker. There was no information.".)
- 07:57, 22 April 2020 Dnevil talk contribs uploaded File:Modeltec May1984-2.jpg (Title page of the first issue of Modeltec Magazine, May 1984. Photo by Daris A Nevil.)
- 08:07, 1 April 2020 Dnevil talk contribs uploaded File:AndrewMatthews case hardengin Facebook 20200401-3.jpg (The arm after polishing on the surface table with some wet and dry. Photo by Andrew Matthews, 1 April 2020.)
- 08:06, 1 April 2020 Dnevil talk contribs uploaded File:AndrewMatthews case hardengin Facebook 20200401-2.jpg (The arm after polishing on the surface table with some wet and dry. Photo by Andrew Matthews, 1 April 2020.)
- 08:04, 1 April 2020 Dnevil talk contribs uploaded File:AndrewMatthews case hardengin Facebook 20200401-1.jpg (Here I am casehardening a mechanical lubricator driving arm, being held with my cheap sacrificial set of long nose pliers. Photo by Andrew Matthews, 1 April 2020.)
- 22:31, 31 March 2020 Dnevil talk contribs uploaded File:Martys drivers 004.jpg (Photo by Donald Yungling, 2020.)
- 22:27, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Drivers 001.jpg (Photo by Donald Yungling, 2020.)
- 22:26, 31 March 2020 Dnevil talk contribs uploaded File:Martys drivers 002.jpg (Photo by Donald Yungling, 2020.)
- 22:24, 31 March 2020 Dnevil talk contribs uploaded File:Martys drivers 010.jpg (Photo by Donald Yungling, 2020.)
- 22:23, 31 March 2020 Dnevil talk contribs uploaded File:Martys drivers 014.jpg (Photo by Donald Yungling, 2020.)
- 22:22, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 030.JPG (Photo by Donald Yungling, 2020.)
- 22:19, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 031.JPG (Photo by Donald Yungling, 2020.)
- 22:18, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 038.JPG (Photo by Donald Yungling, 2020.)
- 22:17, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 039.JPG (Photo by Donald Yungling, 2020.)
- 22:15, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 037.JPG (Photo by Donald Yungling, 2020.)
- 22:13, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 023.jpg (Photo by Donald Yungling, 2020.)
- 22:08, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 042.JPG (Photo by Donald Yungling, 2020.)
- 22:06, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 045.JPG (Photo by Donald Yungling, 2020.)
- 22:05, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 046.JPG (Photo by Donald Yungling, 2020.)
- 22:03, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 047.JPG (Photo by Donald Yungling, 2020.)
- 21:59, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 048.JPG (Photo by Donald Yungling, 2020.)
- 21:56, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 049.JPG (Photo by Donald Yungling, 2020.)
- 21:55, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 050.JPG (Photo by Donald Yungling, 2020.)
- 21:53, 31 March 2020 Dnevil talk contribs uploaded File:Marty's Lead Truck 051.JPG (Photo by Donald Yungling, 2020.)
- 21:51, 31 March 2020 Dnevil talk contribs uploaded File:Marty's spring rigging 523.JPG (Photo by Donald Yungling, 2020.)
- 21:49, 31 March 2020 Dnevil talk contribs uploaded File:Marty's spring rigging 739.jpg (Photo by Donald Yungling, 2020.)
- 21:44, 31 March 2020 Dnevil talk contribs uploaded File:Marty's spring rigging 882.jpg (Photo by Donald Yungling, 2020.)
- 21:58, 28 March 2020 Dnevil talk contribs uploaded File:Marty's spring rigging 520.JPG (Photo by Donald Yungling, 2020.)